Viperdet Shock tube provides a high degree of safety in both underground and surface-blasting applications, it is safe against extraneous electric currents and provides a high level of security against static electricity found in normal mining and construction conditions.
Viperdet Lead-in-line is designed to initiate one to eight shock tubes.
Shock tube: Yellow, provides high visibility.
Viperdet Lead-in-line is available in various lengths.
Connector: Viperdet Lead-in-line can accept up to eight shock tubes.
Viperdet Shock tube can be spliced to Viperdet Trunkline products which allow up to eight shock tubes.
Viperdet Shock Tube can be spliced into a Viperdet Trunkline for initiation of of up to eight shock tubes.
To prevent a snap, slap, and shoot incident (unexpected detonation) never pull or stretch non-electric shock tube to the point of breaking.
Never allow vehicle entanglement with ViperDet Shock Tube.
All explosives must be transported and stored in accordance with relevant local, state and federal regulations.
Product Risk Profile
All explosives are classified as dangerous goods and may cause damage to property, personal harm, or death, if not used correctly.
Severe detonation hazard when exposed to heat.
Detonation may occur from impact, friction, or excessive heating.
Never attempt to fight explosives fires.
First Aid: Refer to Safety Data Sheet for first-aid information.
ViperDet Shock Tube shelf life is 36 months when stored in the original packaging, under dry conditions and moderate temperate, and in a well ventilated and approved magazine.
Viperdet Shock Tube
Case Dimensions (L × W × H):
508 mm × 254 mm × 279 mm (20 in × 10 in × 11 in).
|
Length (m) |
Length (ft) |
Spools/case |
|
762 |
2500 |
2 |
Viperdet Lead-in-Line
Case Dimensions (L × W × H):
508 mm × 451 mm × 197 mm (20 in × 17.75 in × 7.75 in).
|
Length (m) |
Length (ft) |
Spools/case |
NEM/case (kg) |
NEM/case (lb) |
|
61 |
200 |
21 |
0.2 |
0.4 |
|
152 |
500 |
12 |
0.3 |
0.7 |
|
305 |
1000 |
6 |
0.3 |
0.7 |
All explosives must be transported in accordance with relevant local, state and federal regulations.
ViperDet Shock Tube 1.4S Classification:
Each case has a single layer that contains two spools.
Hazardous Material Classification:
Articles, Explosives, N.O.S. Class and Division 1.4S, PGII, UN 0349.
In case of emergencies, click here to contact our team for assistance.
Omnia disclaims all liability whatsoever, whether arising in contract, delict (including negligence) or otherwise in relation to the use of any products/solutions or services and all implied warranties, terms and conditions relating to the products/solutions or services (whether implied by statue, common law or otherwise), including (without limitation) any warranty, term or condition as to accuracy, completeness, satisfactory quality, performance, fitness for purpose or any special purpose, non-infringement, information accuracy, as between Omnia and you, are hereby excluded. Omnia specifically disclaims liability and will not be responsible for, any liability or damages, howsoever arising, resulting from the use or reliance upon the information in this document.
You assume sole responsibility for results obtained from the use of the products/solutions or services, and for conclusions drawn from such use.
We continuously update our technical data sheets to reflect the most current and accurate information based on the latest available data. As such, the information provided is subject to revision. We recommend regularly checking for updates to ensure you are accessing the most up-to-date technical details.
