Viperdet Dual is the equivalent of using a Viperdet MS and a Viperdet QS together.
The surface connector can be used to connect to other Viperdet Dual units to nearby blast holes, providing delayed initiation timing.
Viperdet Dual non-electric detonators must not be used in flammable environments such as methane or coal dust.
Viperdet non-electric detonators are safe against extraneous electric currents except lightning.
Detonator strength: No. 8 detonator fitted with a double crimp.
Shock tube: Orange, with three layers coiled in a 'Figure 80' for ease of deployment and the avoidance of tangles. The shock tube is resistant to abrasion and designed to elongate to avoid tensile strength damage under normal use conditions.
Connector: Plastic, designed to initiate up to eight shock tubes. Colour-coded blocks are used to distinguish different delay periods.
Label: Water resistant. Laser printing provides clear and smudge resistant timing and product information.
Viperdet Dual non-electric detonators can be used to prime the full range of BME's detonator sensitive products.
To prevent a snap, slap, and shoot incident (unexpected detonation) never pull or stretch non-electric shock tube to the point of breaking.
This product may be used in ground temperatures up to a maximum of 65°C (150°F).
If the application requires use outside of this temperature range please contact a BME Technical Representative for additional guidance.
Specific Properties
Combinations of connectors and in-hole detonators available.
*Standard delay. Other delays upon request.
|
Connector color |
Surface time (ms)/In-hole time (ms) |
|
Yellow |
17/500 |
|
Red |
25/500* |
|
White |
42/500 |
|
Black |
67/500 |
The recommended maximum sleep time is 21 days.
If the application requires longer in-hole sleep time, please consult with a BME Technical Representative for guidance.
All explosives must be transported and stored in accordance with relevant local, state and federal regulations.
All explosives are classified as dangerous goods and may cause damage to property, personal harm, or death, if not used correctly.
Product risk profile
Risk of explosion by shock, friction, fire, or other ignition sources.
Never attempt to fight explosives fires.
Viperdet Dual detonators must not be used in flammable environments such as methane or coal dust.
Viperdet Dual detonators must be stored at moderate temperatures in a dry and well-ventilated place according to local regulations.
First Aid: Refer to Safety Data Sheet for first-aid information.
Store as per the recommended storage conditions.
Viperdet Dual detonators must be stored at moderate temperatures in a dry and well-ventilated place according to local regulations.
Viperdet Dual shelf life is 24 months when stored in the original packaging, under dry conditions at moderate temperatures, and in a well ventilated and approved magazine.
Standard Length.
Fastest available delivery time.
Additional lengths upon request.
1.4B Classification (standard packaging - nominal values)
Standard Length.
Unit packaging is in coils.
|
Length (m) |
Length (ft) |
Units/ |
Gross weight (kg) |
Gross weight (lb) |
Net weight (kg) |
Net weight (lb) |
|
4.8 |
16 |
180 |
12 |
26 |
10 |
22 |
|
6 |
20 |
180 |
14 |
31 |
12 |
26 |
|
9 |
30 |
120 |
12 |
26 |
10 |
22 |
|
12 |
39 |
120 |
14 |
31 |
12 |
26 |
|
15 |
49 |
72 |
10 |
22 |
8 |
18 |
|
18 |
59 |
72 |
11 |
24 |
9 |
20 |
|
21 |
69 |
72 |
11 |
24 |
9 |
20 |
|
24 |
79 |
54 |
10 |
22 |
8 |
18 |
|
30 |
98 |
40 |
10 |
22 |
8 |
18 |
1.4B Classification
[Special packaging] (nominal values)
**Non-Standard Length.
Unit packaging is in spools.
|
Length (m)** |
Length (ft) |
Units/ |
Gross weight (kg) |
Gross weight (lb) |
Net weight (kg) |
Net weight (lb) |
|
40 |
131 |
16 |
12 |
26 |
7 |
15 |
|
50 |
164 |
16 |
13 |
29 |
8 |
18 |
|
60 |
197 |
16 |
14 |
31 |
9 |
20 |
|
70 |
230 |
16 |
14 |
31 |
9.5 |
21 |
|
80 |
262 |
16 |
15 |
33 |
10.5 |
23 |
|
100 |
328 |
16 |
17 |
37 |
12 |
26 |
Class 1.1B, UN 0360, DETONATOR ASSEMBLIES, NON-ELECTRIC.
Class 1.4B, UN 0361, DETONATOR ASSEMBLIES, NON-ELECTRIC.
Class 1.4S, UN 0500, DETONATOR ASSEMBLIES, NON-ELECTRIC.
In case of emergencies, click here to contact our team for assistance.
Omnia disclaims all liability whatsoever, whether arising in contract, delict (including negligence) or otherwise in relation to the use of any products/solutions or services and all implied warranties, terms and conditions relating to the products/solutions or services (whether implied by statue, common law or otherwise), including (without limitation) any warranty, term or condition as to accuracy, completeness, satisfactory quality, performance, fitness for purpose or any special purpose, non-infringement, information accuracy, as between Omnia and you, are hereby excluded. Omnia specifically disclaims liability and will not be responsible for, any liability or damages, howsoever arising, resulting from the use or reliance upon the information in this document.
You assume sole responsibility for results obtained from the use of the products/solutions or services, and for conclusions drawn from such use.
We continuously update our technical data sheets to reflect the most current and accurate information based on the latest available data. As such, the information provided is subject to revision. We recommend regularly checking for updates to ensure you are accessing the most up-to-date technical details.
