Innopak 600 Super and Super Plus are designed for blasting in surface and underground applications. They are suitable for use in wet and dry holes where small-diameter explosives are required.
Innopak 600 Plus is suitable for surface and underground applications and can be used as a primer.
Velocity of Detonation (VOD): 3500 m/s to 6400 m/s (11,500 ft/s to 21,000 ft/s) dependent on application, diameter, confinement and density.
RWS and RBS calculated with ANFO density 0.80 g/cc and effective energy 2.260 kJ/kg.
ANFO: Density 0.8 g/cm³. Effective Energy 2.260 kJ/kg
Innopak 600 cartridges emulsions are compatible with most non-electric and electronic detonator systems and are reliably initiated with detonators assembled with high strength detonators (No. 8 strength or greater base charge).
Do not attempt to initiate Innopak with No. 6 strength fuse caps.
Consult with a BME Technical Representative for use with detonating cord and additional priming and initiation guidance.
Maximum hole depth depends on product selection, hole diameter, product densities, and the presence of water. Please contact a BME Technical Representative for additional guidance.
This product may be used in ground temperatures from to a maximum of 65°C (150°F) . If the application requires use outside this temperature range please contact a BME Technical Representative for additional guidance.
This product is not formulated for use in reactive ground. Reactive ground is typically characterised by the presence of sulphide mineralization. If the application requires use in known reactive ground, or in untested sulphide bearing ground, please contact a BME Technical Representative for additional guidance.
All explosives must be transported and stored in accordance with local, state and federal regulations.
Product Risk Profile
Classified as hazardous substance, dangerous goods with mass-explosion hazard.
Stable under normal storage conditions.
Never load a borehole containing hot or burning material.
Temperatures above 68 °C (150 °F) could be dangerous.
Risk of explosion by shock, friction, fire, or other ignition sources.
Never force explosive materials into a borehole.
Never attempt to fight explosives fires.
Innopak products should be kept at temperatures between –15 °C (5 °F) and 55 °C (131 °F) prior to initiation.
Shelf life is 12 months from date of manufacturing and when stored at temperature conditions between –20 °C (–4 °F) and 40 °C (104 °F).
All specifications may vary slightly from the stated nominal.
Cartridges available in Valeron® film for enhanced durability during loading or PMP film.
V = Valeron®, P = PMP.
*Product available as Super and Plus only.
Nominal Gross Case Weight: 25 kg (55 lb)
Case dimensions (L × W × H):
445 mm × 343 mm × 216 mm (17.5 in × 13.5 in × 8.5 in)
All explosives must be transported in accordance with local, state and federal regulations.
Class 1.1 D, PG II, UN No. 0241, EXPLOSIVE, BLASTING, Type E.
In case of emergencies, click here to contact our team for assistance.
Omnia disclaims all liability whatsoever, whether arising in contract, delict (including negligence) or otherwise in relation to the use of any products/solutions or services and all implied warranties, terms and conditions relating to the products/solutions or services (whether implied by statue, common law or otherwise), including (without limitation) any warranty, term or condition as to accuracy, completeness, satisfactory quality, performance, fitness for purpose or any special purpose, non-infringement, information accuracy, as between Omnia and you, are hereby excluded. Omnia specifically disclaims liability and will not be responsible for, any liability or damages, howsoever arising, resulting from the use or reliance upon the information in this document.
You assume sole responsibility for results obtained from the use of the products/solutions or services, and for conclusions drawn from such use.
We continuously update our technical data sheets to reflect the most current and accurate information based on the latest available data. As such, the information provided is subject to revision. We recommend regularly checking for updates to ensure you are accessing the most up-to-date technical details.
