Innovex RG is designed for blasting applications in open pit mines, quarries, and construction with wet or dry holes. It is specifically formulated for use in the
presence of sulphide reactive ground.
The Innovex RG multiple salt formulation, in conjunction with other qualified initiation products and site specific procedures, form a system proven to be safe and reliable for blasting in sulphide reactive ground. Innovex RG may also be qualified for use in ground with elevated temperatures on a site specific basis. Innovex RG is a product demonstrated to generate very low levels of post blast NOx fume.
| Property | Unit | Base Emulsion | Gas Sensitized Emulsion | |||
| Cup Density | g/cm³ | 1.46 to 1.50 | ||||
| Average In-Hole Density | g/cm³ | 1.10 | 1.15 | 1.20 | 1.25 | |
| Velocity of Detonation | m/sec | 5011 | 5208 | 5398 | 5580 | |
| Relative Weight Strength | RWS | 66 | 69 | 71 | 74 | |
| Relative Bulk Strength | RBS | 91 | 99 | 107 | 115 | |
| Bulk Energy | cal/g | 688 | ||||
| Volumetric Energy | cal/cm³ | 818 | ||||
| Minimum Hole Diameter | mm | 64 | 64 | 64 | 64 | |
| Water Resistance | Excellent | Excellent | Excellent | Excellent | ||
Velocity of Detonation, Relative Weight and Bulk Strengths calculated using the IPX code at a density of 1.20 g/cm³ and a cut-off pressure of 100 MPa relative to ANFO at a density of 0.80 g/cm³.
Actual in field velocity of detonation will vary and is dependent on hole diameter and confinement.
Bulk and Volumetric Energies measurements made by underwater bubble energy tests at UTEC labs.
Innovex RG is compatible with most non-electric and electronic detonator systems.
Consult with a BME Technical Specialist for application of Innovex RG with compatible priming and initiation products in the ground conditions characterized by elevated heat above 70 °C.
Maximum hole depth depends on product selection, hole diameter, product densities, critical void space and the presence of water. Please contact a BME Technical Representative for additional guidance and site specific calculations using BME’s DensDepth program.
This product may be used in ground temperatures from 0 ° to a maximum of 65 °C. If the application requires use outside this temperature range please contact a BME Technical Representative for additional guidance.
This product is specifically formulated for use in reactive ground. Reactive ground is typically characterised by the presence of sulphide mineralization. If the application requires use in known reactive ground, or in untested sulphide bearing ground, please contact a BME Technical Specialist for additional guidance.
The safe loading window and in hole sleep time for Innovex RG is site specific. The site specific sleep time is determined by isothermal reactive ground testing at a BME laboratory. It is also dependent on factors such as hole diameter, density, ground water conditions and initiation system. Please consult with a BME Technical Representative for guidance.
Product Classification of System Components
Authorised Name: INNOVEX RG - Base Emulsion
Correct Shipping Name: AMMONIUM NITRATE EMULSION
Classification: 5.1
UN Number: 3375
Authorised Name: INNOVEX - Sensitizing Agent
Correct Shipping Name: NITRITES, ORGANIC, AQUEOUS SOLUTION, N.O.S.
Classification: 5.1
UN Number: 3219
Product Classification of Finished Sensitized Explosive Product
Authorised Name: INNOVEX RG
Correct Shipping Name: EXPLOSIVE, BLASTING
Classification: 1.1D
UN Number: 0241
In case of emergencies, click here to contact our team for assistance.
Omnia disclaims all liability whatsoever, whether arising in contract, delict (including negligence) or otherwise in relation to the use of any products/solutions or services and all implied warranties, terms and conditions relating to the products/solutions or services (whether implied by statue, common law or otherwise), including (without limitation) any warranty, term or condition as to accuracy, completeness, satisfactory quality, performance, fitness for purpose or any special purpose, non-infringement, information accuracy, as between Omnia and you, are hereby excluded. Omnia specifically disclaims liability and will not be responsible for, any liability or damages, howsoever arising, resulting from the use or reliance upon the information in this document.
You assume sole responsibility for results obtained from the use of the products/solutions or services, and for conclusions drawn from such use.
We continuously update our technical data sheets to reflect the most current and accurate information based on the latest available data. As such, the information provided is subject to revision. We recommend regularly checking for updates to ensure you are accessing the most up-to-date technical details.
